[ Welcome to Connect Supportbase ]
Please Visit our Sponsor!

There are several different ways to set up Mac computers.

Access Number Switch for MAC

  1. These Directions are for FreePPP
  2. Click the Apple in the upper left corner of the screen.
  3. In the Apple Menu click Control Panel
  4. If you see both FreePPP and PPP in the Control Panel section, follow both sets of directions below
  5. If you see only FreePPP in the Control Panel, follow only the FreePPP Directions
  6. If you see only PPP in the Control Panel, follow only the PPP Directions below

FreePPP Directions

  1. Click on FreePPP Setup
    2.
  2. Under the version number on the left hand side, click the little triangle if it is pointing to the right; this will drop down the FreePPP Setup Menu
  3. Under General tab, make sure that the only thing that has an "X" is "Allow applications to open connection.
  4. Click the Accounts tab; Click the Connect file; Click Edit
  5. In the phone number box, type YOUR NEW DIAL-UP NUMBER; find this number in the chart above
  6. You do not need to re-enter your name and password
  7. Click OK at the bottom
  8. Your system is now ready to dial our new connection number for you

PPP Directions

  1. Click on PPP Setup
    2.
  2. In the phone number box, type the new dialup number, located in the chart above
  3. You do not need to re-enter your name and password
  4. Close all windows by clicking OK or a similar button.
  5. Save your changes by choosing Configurations in the File Menu
  6. Your system is now ready to dial your new connection number

Go Back